Cisco ASA 5545-X Cli Configuration Guide

1-12
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring RIP
Feature History for RIP
Feature History for RIP
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for RIP
Feature Name Releases Feature Information
RIP support 7.0(1) Support was added for routing data, performing
authentication, and redistributing and monitoring routing
information using the Routing Information Protocol (RIP).
We introduced the route rip command.
Clustering 9.0(1) For RIP, bulk synchronization, route synchronization, and
layer 2 load balancing are supported in the clustering
environment.
We introduced or modified the following commands: show
route cluster, debug route cluster, show mfib cluster,
debug mfib cluster.

Cisco ASA 5545-X Specifications

General

Power Supply	Dual, Hot-swappable
Memory	8 GB
Flash Memory	8 GB
AC Input Voltage	100-240 VAC
Form Factor	1 RU
Number of VLANs	1024
Security Contexts	50
Interfaces	8 x Gigabit Ethernet
Frequency	50-60 Hz
Dimensions (H x W x D)	1.75 x 17.5 x 12 in (4.4 x 44.5 x 30.5 cm)
High Availability	Active/Standby
Storage	SSD (optional)