1-31
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Digital Certificates
Configuring Digital Certificates
Examples
The following is sample output that shows two user certificates in the database.
Username: user1
Renewal allowed until: Not Allowed
Number of times user notified: 0
PKCS12 file stored until: 12:45:52 UTC Fri Jan 4 2017
Certificates Issued:
serial: 0x71
issued: 12:45:52 UTC Thu Jan 3 2008
expired: 12:17:37 UTC Sun Dec 31 2017
status: Not Revoked
Username: user2
Renewal allowed until: Not Allowed
Number of times user notified: 0
PKCS12 file stored until: 12:27:59 UTC Fri Jan 4 2008
Certificates Issued:
serial: 0x2
issued: 12:27:59 UTC Thu Jan 3 2008
expired: 12:17:37 UTC Sun Dec 31 2017
status: Not Revoked
<--- More --->
Setting Up External Local CA File Storage
You can store the local CA server configuration, users, issued certificates, and CRLs in the local CA
server database either in flash memory or in an external local CA file system. To configure external local
CA file storage, perform the following steps:
Command Purpose
Step 1
mount name type
Example:
hostname (config)# mount mydata type cifs
Accesses configuration mode for the specific file
system type.
Step 2
mount name type cifs
Example:
hostname (config-mount-cifs)# mount mydata type cifs
server 10.1.1.10 share myshare
domain example.com
username user6
password ********
status enable
Mounts a CIFS file system.
Note Only the user who mounts a file system can
unmount it with the no mount command.
To Next Page
Loading...
Need help?
General
