Cisco ASR 9001-S Hardware Installation Guide

3-19
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 3 Installing Modules and Cables in the Chassis
Connecting Power to the Router
Step 4 Plug the AC power cord into the receptacle at the front of the chassis (see Figure 3-11).
Step 5 Close the cable wrap to secure the AC power cord plug to the power module receptacle.
Figure 3-11 Typical AC Power Connections
Step 6
Plug the other end of the AC power cord into the AC source receptacle.
Step 7 Proceed to the “Powering on the Router” section on page 3-21.
332894

Cisco ASR 9001-S Specifications

General

Brand	Cisco
Model	ASR 9001-S
Category	Network Router
Language	English