Cisco ASR 9001 Installation Guide

Figure 169: Installing a Version 2 or Version 3 Power Module in the Cisco ASR 9010, 9912, 9922 Routers
Figure 170: Installing a Version 2 Power Module in the Cisco ASR 9904 Router
Installing DC Power Modules
Required Tools and Equipment
You need the following tool to perform this task:
• 7/16 hex socket and torque wrench, torque 50 in-lb.
Steps
Follow these steps to reinstall the DC power modules back into the chassis (see Figure 168: Installing a Version
1 Power- Module, on page 160 for the version 1 power module or Figure 169: Installing a Version 2 or Version
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
161
Installing Cards and Modules in the Chassis
Installing DC Power Modules

Cisco ASR 9001 Specifications

General

Router Series	ASR 9000 Series
Rack Units	2 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Power Supply	AC or DC
Memory	8 GB
Forwarding Capacity	Up to 80 Gbps
Switching Capacity	160 Gbps
Operating Temperature	0 to 40°C
Weight	24 lb
Redundancy	Power supply