Cisco ASR 9001 Installation Guide

Figure 198: Version 1 Power Module Status Indicators
ON continuously when the input
voltage is present and within the
correct range
BLINKING when the input voltage
is out of acceptable range
OFF when no input voltage is
present
Input power LED1
ON when the power module output
voltage is present
BLINKING when the power
module is in a power limit or
overcurrent condition
Output power LED2
ON to indicate that a power module
failure has occurred
Fault LED3
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
204
Troubleshooting the Installation
Troubleshooting the AC Input Power Subsystem

Cisco ASR 9001 Specifications

General

Router Series	ASR 9000 Series
Rack Units	2 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Power Supply	AC or DC
Memory	8 GB
Forwarding Capacity	Up to 80 Gbps
Switching Capacity	160 Gbps
Operating Temperature	0 to 40°C
Weight	24 lb
Redundancy	Power supply