Table 2: Supported Hot Swapping Combinations
A900-RSP3C-400-SA900-RSP2A-64 and
A900-RSP2A-128
A900-RSP1
Cisco IOS Release 3.16Cisco IOS Release 3.13Cisco IOS Release 3.14
Swapping allowed on all
Ethernet interface
modules
1
1-port 10 Gigabit Ethernet
XFP Interface Module
(1X10GE)
8-port Gigabit Ethernet
SFP Interface Module
(8X1GE)
8-port Gigabit Ethernet
RJ45 (Copper) Interface
Module (8X1GE)
No support
SFP Combo IM—8-port
Gigabit Ethernet
(8X1GE) +
1-port 10 Gigabit Ethernet
(1X10GE)
No supportCopper Combo
IM—8-port Gigabit
Ethernet (8X1GE)
+ 1-port 10 Gigabit
Ethernet Interface
Module(1X10GE
8-port Gigabit Ethernet
SFP Interface Module
(8X1GE)
8-port Gigabit Ethernet
RJ45 (Copper) Interface
Module (8X1GE)
1-port 10 Gigabit Ethernet
XFP Interface Module
(1X10GE)
No support2-port 10 Gigabit Ethernet
Interface
Module(2X10GE)
Swapping allowed on all
Ethernet interface
modules
**
No supportNo support8-port 10 Gigabit Ethernet
Interface Module
(8X10GE)
No supportNo support1-port 100 Gigabit
Ethernet Interface Module
(1X100GE)
No supportNo support2-port 40 Gigabit Ethernet
QSFP Interface Module
(2X40GE)
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
30
Installing the Cisco ASR 903 Router
Hot-Swapping an Interface Module