Cisco ASR1002 - ASR 1002 Router - Page 10

PurposeCommand or Action
Specifies the domain name of the Jabber server.
domain domain-name
Example:
switch(config-jabber)# domain ccnsr.com
Step 2
Specifies the IP address to use for the Jabber server.
ipaddr ipv4 ip-address
Example:
switch(config-jabber)# ipaddr ipv4 172.16.0.2
Step 3
Specifies the notifications to display. Possible options are:
log-level level
Step 4
Example:
switch(config-jabber)# log-level info
• debug
• error
• info
• verbose
• warn
What to Do Next
Configure the SRE.
Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0
4 OL-25794-01
Configuring the XMPP Server
Configuring the XMPP Server