Cisco ASR1002 - ASR 1002 Router - Install the Cables Using the Cable-Management Bracket

--------------------------------------------------------------------
DC
PE-name PE-address
--------------------------------------------------------------------
DC1
PE1 1.1.1.1
PE2 2.2.2.2
PE3 3.3.3.3
DC2
PE4 4.4.4.4
PE1 1.1.1.1
my-data-center-14
my-pe-22 22.22.22.22
my-pe-28 111.111.111.111
show service-resolution service-requests command: example
SR-1# show service-resolution service-requests
Service-Request:
ID: 00000001
vdc_id: 22222
user_handle: my_handle_1
URI: https://sr.foobar.net/sr/serv_req_00000001
state: DONE
Message: Service-request '000000001' processing successfully completed.
Detail: n/a
CE-address: 10.10.10.1
PE-address: 10.10.10.2
Ranked DC list:
DC: amazon_west
PE-address: 30.30.30.2
PE-address: 20.20.20.1
DC: att_west
PE-address: 50.50.50.1
PE-address: 60.60.60.1
PE-address: 40.40.40.1
Service-Request:
ID: 00000050
vdc_id: 12345
user_handle: h2
URI: https://sr.foobar.net/sr/serv_req_00000050
state: PENDING
Message: Waiting for ranking processing to complete
Detail: n/a
Service-Request:
ID: 00001000
vdc_id: 7890
user_handle: handle3
URI: https://sr.foobar.net/sr/serv_req_00001000
state: ERROR
Message: Performance Manager Error
Detail: n/a
Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0
8 OL-25794-01
Configuring Service Placement
show service-resolution service-requests command: example