• Hostname—Hostname or IP address of the PE device.
• PFMID—ID of the PFM entity.
• PE Type—Either a CE or DCE device. If the device is configured with a local CE table, it should be a
CE device facing a PE device.
• Jabber ID—ID of the XMPP client.
Performance Manager Message Processing
The SRE starts a Cisco NPS message flow. The message flow is processed sequentially by the performance
subsystem (PFM and PFA) and PDP.
Figure 2: PFM Message Flow
Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0
OL-25794-01 13
Configuring Performance Metrics to Select a Service
Performance Manager Message Processing
To Next Page
Loading...
