EasyManuals Logo
Home>Cisco>Network Router>ASR1006 - ASR 1006 Modular Expansion Base

Cisco ASR1006 - ASR 1006 Modular Expansion Base Deployment Guide

Cisco ASR1006 - ASR 1006 Modular Expansion Base
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Deployment
Determining Deployment Strategy
8
Deployment Guide: Cisco Aironet 1000 Series Lightweight Access Points
78-17279-01
Voice over IP Requirements
When deploying 802.11 wireless LANs to support Voice over IP (VoIP) telephones, such as SpectraLink
NetLink Telephones, a few special considerations are needed in the deployment process. When
deploying an 802.11b voice system, seamless full coverage with an average user throughput of 5 Mbps
or more should be used. Areas such as stairways, bathrooms, cafeterias and outside areas may require
special consideration and additional access points. These are areas that are not typically critical for data
users but are critical coverage areas for voice users who want seamless coverage.
Determining Deployment Strategy
Depending on the customer and the deployment requirements determined inDetermining Deployment
Requirements,” there are three strategies for designing and deploying an Cisco WLAN Solution wireless
network. The following table provides guidelines for which one is appropriate.
Table 5 Deployment Strategy
Deployment Option Deployment Requirements
Professional Site Survey This option should be considered when:
Deployments require full coverage with 0% coverage holes.
The RF characteristics of the building vary throughout the coverage
area.
The building type is not typical or does not fit into one of the standard
configurations (e.g. Arena, Convention Center, Stock Exchange).
The cost or logistics of running Ethernet cables is prohibitive.
RF Prediction with
Optional Site Survey
This option should be considered when:
The RF characteristics of the building vary throughout the coverage
area.
The building type is not typical (e.g. Arena, Convention Center, Stock
Exchange).
A Professional Site Survey is too costly, and a graphical coverage plot
is desired before deployment.
Basic Guidelines with
Optional Site Survey
This option is adequate for 80% to 90% of deployments, and is suitable
when:
The RF Characteristics are homogenous throughout the coverage area.
The building type can be easily classified.

Table of Contents

Other manuals for Cisco ASR1006 - ASR 1006 Modular Expansion Base

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR1006 - ASR 1006 Modular Expansion Base and is the answer not in the manual?

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General IconGeneral
BrandCisco
ModelASR1006 - ASR 1006 Modular Expansion Base
CategoryNetwork Router
LanguageEnglish

Related product manuals