Cisco ASR1006 - ASR 1006 Modular Expansion Base Deployment Guide

Deployment
Where to Go from Here
22
Deployment Guide: Cisco Aironet 1000 Series Lightweight Access Points
78-17279-01
• When you are installing Cisco 1000 series lightweight access points using the “RF Prediction with
Optional Site Survey” or “Basic Guidelines with Optional Site Survey” method:
– Complete “Optional Minimal Site Survey” for the optional minimal site survey, or
– Use the Quick Start Guide: Cisco Aironet 1000 Series Lightweight Access Points with Internal
Antennas or Quick Start Guide: Cisco Aironet 1000 Series Lightweight Access Points with
External Antennas to install the Cisco 1000 series lightweight access points without a minimal
site survey.
Where to Go from Here
You have successfully planned and tested the Cisco 1000 series lightweight access point RF coverage in
your target area, and have determined where the Cisco 1000 series lightweight access points are to be
located.
Continue with Quick Start Guide: Cisco Aironet 1000 Series Lightweight Access Points with Internal
Antennas or Quick Start Guide: Cisco Aironet 1000 Series Lightweight Access Points with External
Antennas for final installation instructions.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL