Cisco CALNET 3 Guide

The user can select User Login > Voice > User to add screen saver to the phone.
Step 2 In the Screen section, set up the fields as described in Parameters for Screen Saver, on page 233.
Step 3 Click Submit All Changes.
Parameters for Screen Saver
The following table defines the function and usage of the screen saver parameters in the Screen section under
theVoice> User tab in the phone web interface. It also definesthe syntax of the stringthat is added in thephone
configuration file (cfg.xml) with XML code to configure a parameter.
Table 44: Parameters for Screen Saver
DescriptionParameter
Select Yes to enable a screen saver on the phone.
When the phone is idle for a specified time, it enters
screen saver mode.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Screen_Saver_Enable
ua="rw">Yes</Screen_Saver_Enable>
• In the phone web interface, set this field to Yes
to enable screen saver.
Allowed values: Yes|No
Default: No
Screen Saver Enable
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
233
Cisco IP Phone Configuration
Parameters for Screen Saver

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English