DescriptionParameter
Enter the username for a credentialed user on the LDAP server.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<LDAP_User_Name ua="na">dc=cv2bu,dc=com</LDAP_User_Name>
• In the phone web interface, enter the username.
Default: Empty
User Name
Enter the password for the LDAP username. The password entered in this field shows
as the following in the configuration file (cfg.xml).
<!-- <LDAP_Password ua="na">**********</LDAP_Password >-->
Default: Empty
Password
Select the authentication method that the LDAP server requires. Choices are:
• None—No authentication is used between the client and the server.
• Simple—The client sends its fully-qualified domain name and password to the
LDAP server. Might present security issues.
• Digest-MD5—The LDAP server sends authentication options and a token to the
client. The client returns an encrypted response that is decrypted and verified by
the server.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<LDAP_Auth_Method ua="na">Simple</LDAP_Auth_Method>
• In the phone web interface, choose a authentication method.
Default: None
Auth Method
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
298
Cisco IP Phone Configuration
Parameters for LDAP Directory
To Next Page
Loading...
Need help?
General