Cisco CALNET 3 Guide

DescriptionParameter
Provides the option to take the caller ID from PAID-RPID-FROM,
PAID-FROM, RPID-PAID-FROM, RPID-FROM, or FROM header.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Caller_ID_Header
ua="na">PAID-RPID-FROM</Caller_ID_Header>
• In the phone web page, select an option.
Allowed values: PAID-RPID-FROM, AID-FROM, RPID-PAID-FROM,
RPID-FROM, and FROM
Default: PAID-RPID-FROM
Caller ID Header
Controls whether to hold call leg with transfer target before sending
REFER to the transferee when initiating a fully-attended call transfer
(where the transfer target has answered).
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Hold_Target_Before_Refer
ua="na">No</Hold_Target_Before_Refer>
• In the phone web page, select Yes or No.
Default: No
Hold Target Before Refer
When enabled and the Notify message body is too big causing
fragmentation, the Notify message xml dialog is simplified; Session
Description Protocol (SDP) is not included in the dialog xml content.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Dialog_SDP_Enable ua="na">No</Dialog_SDP_Enable>
• In the phone web page, select Yes or No.
Allowed values: Yes or No
Default: No
Dialog SDP Enable
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
346
Cisco IP Phone Installation
SIP Parameters

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English