Cisco CALNET 3 Guide

DescriptionParameter
If a resync operation fails because the phone was unable to retrieve a profile from the
server, or the downloaded file is corrupt, or an internal error occurs, the phone tries to
resync again after a time specified in seconds.
The valid formats are as follows:
• An integer
Example: An input of 300 indicates that the next retry for resync occurs in 300
seconds.
• Multiple integers
Example: An input of 600,1200,300 indicates that the first retry occurs in
600 seconds after the failure, the second retry occurs in 1200 seconds after the
failure of the first retry, and the third retry occurs in 300 seconds after the failure
of the second retry.
• A time range
Example, an input of 2400+30 indicates that the next retry occurs in between
2400 and 2430 seconds after a resync failure.
If the delay is set to 0, the device does not try to resync again following a failed resync
attempt.
• In the phone configuration file (cfg.xml) with XML, enter a string in this format:
<Resync_Error_Retry_Delay
ua="na">60,120,240,480,960,1920,3840,7680,15360,30720,61440,86400</Resync_Error_Retry_Delay>
• On the phone web page, specify the time period in seconds.
Default: 60,120,240,480,960,1920,3840,7680,15360,30720,61440,86400
Resync Error Retry
Delay
Maximum delay (in seconds) the phone waits before performing a resynchronization.
The device does not resync while one of its phone lines is active. Because a resync
can take several seconds, it is desirable to wait until the device has been idle for an
extended period before resynchronizing. This allows a user to make calls in succession
without interruption.
The device has a timer that begins counting down when all of its lines become idle.
This parameter is the initial value of the counter. Resync events are delayed until this
counter decrements to zero.
The valid value ranges between 0 and 65535.
• In the phone configuration file (cfg.xml) with XML, enter a string in this format:
<Forced_Resync_Delay ua="na">14400</Forced_Resync_Delay>
• On the phone web page, specify the time period in seconds.
The default value is 14,400 seconds.
Forced Resync
Delay
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
51
Cisco IP Phone Provisioning
Profile Resync Parameters

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English