Cisco CALNET 3 Release Notes

CHAPTER 1
Cisco IP Phone 8841, 8851, and 8861 Release
Notes for Firmware Release 10.2(1)
•
Introduction, page 1
•
Cisco IP Phone 8841, 8851, and 8861 Features, page 2
•
Related Documentation, page 4
•
Installation, page 5
•
Unified Communications Manager Endpoints Locale Installer, page 6
•
Limitations and Restrictions, page 7
•
Caveats, page 7
•
Cisco IP Phone Firmware Support Policy, page 17
•
Documentation, Service Requests, and Additional Information, page 17
Introduction
These release notes support the Cisco IP Phones 8841, 8851, and 8861 running SIP Firmware Release 10.2(1).
The following table lists the support and protocol compatibility for the Cisco IP Phones.
Table 1: Cisco IP Phones, Support, and Firmware Release Compatibility
Support RequirementsProtocolCisco IP Phone
Cisco Unified Communications Manager 8.5(1) and
later
Cisco Unified Communications Manager DST Olsen
version D or later
SRST 8.0 (IOS load 15.1(1)T) and above
CME 10.0 (IOS load 15.3(3)M) and above through
Fast-Track
SIPCisco IP Phones 8841, 8851, and
8861
Cisco IP Phone 8841, 8851, and 8861 Release Notes for Firmware Release 10.2(1)
1

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English