Cisco Catalyst 2960-L Getting Started Guide

Mounting an 8-Port or 16-Port Switch in a Rack
Step 1
Use the four Number-12 or Number-10 Phillips machine screws to attach the brackets to the rack.
Step 2
Use the black Phillips machine screw to attach the cable guide to the left or right bracket.
Figure 7: Mounting an 8-Port or 16-Port Switch in a Rack with 19-Inch and 23-Inch Brackets
23-inch rack-mounting bracket319-inch rack-mounting bracket1
Number-12 or Number-10 Phillips machine
screws
2
Cisco Catalyst 2960-L Switch Getting Started Guide
12
Getting Started with the Switch
Installing the Switch

Cisco Catalyst 2960-L Specifications

General

Subtype	Gigabit Ethernet
Power Device	Internal power supply
Stacking	Not supported
Model	Catalyst 2960-L
Uplink Interfaces	4 x Gigabit SFP
Power Supply	Internal
Device Type	Switch
Routing Protocol	Static IP routing
Features	VLAN support, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1w, IEEE 802.1s
Memory	256 MB Flash
Dimensions	1.73 in x 17.5 in x 9.4 in
Operating Temperature	32 to 113°F (0 to 45°C)