Cisco Catalyst 2960-XR Reference

show platform stack compatibility configuration
To display switch stack compatibility information, use the show platform stack compatibility configuration
command in privileged EXEC mode.
show platform stack compatibility configuration{current| failure-log| mismatch [switch switch-number]}
Syntax Description
Displays currently configured system level features.current
Displays non-baseline feature configuration failure log.failure-log
Displays configured non-baseline features that are causing a mismatch.mismatch
(Optional) Displays configured non-baseline features that are causing a
mismatch for the specified switch. The range is 1 to 8.
switch switch-number
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS 15.0(2)EX1
Usage Guidelines
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
Examples
This example shows how to display switch stack compatibility information:
Switch# show platform stack compatibility configuration current
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
22 OL-29435-01
Stack Manager Commands
show platform stack compatibility configuration

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C