Cisco Catalyst 2960-XR Reference

Supported by switch versions: 1 3 4
6: Ahp keyword in IPv6 ACL
Supported by switch versions: 1 3 4
7: Unsupported prefixes in IPv6 ACL
Supported by switch versions: 1 3 4
8: Unicast Reverse Path Forwarding
Supported by switch versions: 1 3 4
9: Multiple FHRP support
Supported by switch versions: 1 3 4
10: Gateway Load Balancing ProtocolVLAN-based FSPAN
Supported by switch versions: 1 2 3 4
11: CTS tagging and role-based enforcement
Supported by switch versions: 1 3 4
12: SPAN support 4 source session
Supported by switch versions: 3
13: Unknown
Supported by switch versions: 4
Switch Level Independent Feature Matrix
==============================================================
Port Level Independent Feature Matrix
==============================================================
1: Routing keyword in IPv6 ACL
Supported by ASIC versions: 1 2 3
2: Ahp keyword in IPv6 ACL
Supported by ASIC versions: 1 2 3
3: Unsupported prefixes in IPv6 ACL
Supported by ASIC versions: 1 2 3
4: Port-based FSPAN
Supported by ASIC versions: 1 2 3
5: IPv6 QoS match protocol support
Supported by ASIC versions: 1 2 3
6: IPv6 QoS ipv6 named ACL support
Supported by ASIC versions: 1 2 3
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
26 OL-29435-01
Stack Manager Commands
show platform stack compatibility table

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C