Cisco Catalyst 9407R User Manual

DescriptionFeature
Supports 1+1 supervisor module redundancy for
integrated resiliency. Supported model numbers (add
= for spare):
• Cisco Catalyst 9400 Series Supervisor 1 Module
(C9400-SUP-1)
• Cisco Catalyst 9400 Series Supervisor 1XL
Module ( C9400-SUP-1XL)
• Cisco Catalyst 9400 Series Supervisor 1XL-Y
25G Module (C9400-SUP-1XL-Y)
Supervisor modules:
• Must be installed in slots numbered 3 and 4 only.
• Have minimum software release version
requirements. Refer to your software release
notes for this information.
See Cisco Catalyst 9400 Series Supervisor Module
Installation Note
Supervisor modules
Accomodates five line cards. Supported model
numbers (add = for spare):
• Cisco Catalyst 9400 Series 48-Port UPOE
10/100/1000 Module (C9400-LC-48U)
• Cisco Catalyst 9400 Series 48-Port 10/100/1000
Module (C9400-LC-48T)
• Cisco Catalyst 9400 Series 24-Port SFP/SFP+
Module (C9400-LC-24XS)
• Cisco Catalyst 9400 Series 48-Port UPOE
Multigigabit Module (C9400-LC-48UX)
• Cisco Catalyst 9400 Series 48-Port SFP Module
(C9400-LC-48S)
• Cisco Catalyst 9400 Series 24-Port SFP Module
(C9400-LC-24S)
• Cisco Catalyst 9400 Series 48-Port Gigabit
Ethernet POE/POE+ Module (C9400-LC-48P)
• Cisco Catalyst 9400 Series 48-Port Gigabit
Ethernet UPOE+ 10/100/1000 Module
(C9400-LC-48H)
See Cisco Catalyst 9400 Series Switching Module
Installation Note
Switching modules
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
11
Product Overview
Catalyst 9407R Switch

Cisco Catalyst 9407R Specifications

General

Model	Cisco Catalyst 9407R
Category	Switch
Chassis Slots	7
Rack Units	10 RU
Form Factor	Rack-mountable
Slots	7
Maximum Number of Line Cards	5
Operating System	Cisco IOS XE
Product Type	Modular Switch
Power Supply Options	AC and DC
Redundancy	Yes