Cisco Catalyst IW6300 Series Getting Started

1
Cisco Systems, Inc. www.cisco.com
Getting Started and Product Document of
Compliance for the Cisco Catalyst IW6300
Heavy Duty Series Access Points
Cisco Part Number 78-101483-01A0
First Published: November 2019
Last Updated: January 2020
 Introduction, page 2
 Items Shipped with your Device, page 2
 Optional Tools and Hardware, page 2
 Equipment that you supply, page 2
 Related Documentation, page 3
 Installation Warning and Caution Statements for Hazardous Locations Environments, page 4
 Additional Considerations Before Installation, page 6
 Grounding the Device, page 6
 Connecting AC Power to IW-6300H-AC-x–K9, page 8
 Connecting DC Power to IW-6300H-DCW-x–K9, page 9
 Connecting DC Power to IW-6300H-DC-x–K9, page 10
 Antennas, page 11
 Avoidance of Electrostatic Discharge, page 11
 Performing Maintenance, page 11
 Removing the Access Point from Service, page 11
 Hazardous Locations Standards and Marking Strings, page 12
 Safety and Compliance Specifications, page 14
 EMC Information, page 15
IMPORTANT! READ ALL THE SAFETY INFORMATION
B
EFORE INSTALLING THE HARDWARE

Cisco Catalyst IW6300 Series Specifications

General

Model	Cisco Catalyst IW6300 Series
Category	Wireless Access Point
MU-MIMO	Yes
Ingress Protection	IP67
Power Options	PoE, DC power
Frequency Bands	2.4 GHz and 5 GHz
MIMO	4x4
Input Power	48V DC
Power over Ethernet	802.3at
Mounting	Wall, Pole, Ceiling
Security	WPA3
Management	Cisco DNA Center