Cisco Catalyst Wireless 9162I Series - Antennas and Radios; Internal Antennas; Operating Frequency and Maximum Output Power

Antennas and Radios
The following sections provide detailed information about the AP's antennas and radios.
Internal Antennas
The Cisco Catalyst Wireless 9162I AP (CW9162I-x) has the following list of internal antennas:
• Two internal dual-band antennas with a dedicated 2.4-GHz radio and a 5-GHz radio
• Two internal single-band antennas with a dedicated 6-GHz radio
• One tri-band antenna with a dedicated 2.4-GHz, 5-GHz, and 6-GHz Aux radio
• One internal single-band antenna with a dedicated 2.4-GHz IoT radio
Operating Frequency and Maximum Output Power
Table 1: Cisco CW9162I AP Values for European Union (CE) Region
Maximum Total EIRP Power Level
(dBm)
Frequency BandsRadio
202.412–2.472 GHzWi-Fi
235.180–5.250 GHz
235.250–5.350 GHz
305.470–5.725 GHz
13.985.725–5.850 GHz
235.945–6.425 GHz
9.92
2400–2483.5 MHzBluetooth Low Energy (BLE)
Cisco Catalyst Wireless 9162I Series Wi-Fi 6E Access Point Hardware Installation Guide
4
About the Access Point
Antennas and Radios