Task ID
OperationsTask ID
readqos
Examples
In this example, the Gigabit Ethernet interface 0/1/0/0 has one policy map attached as a main policy. Outgoing
traffic on this interface will be affected if the policy is modified:
RP/0/RP0/CPU0:router# show policy-map targets
Fri Jul 16 16:38:24.789 DST
1) Policymap: policy1 Type: qos
Targets (applied as main policy):
GigabitEthernet0/1/0/0 output
Total targets: 1
Targets (applied as child policy):
Total targets: 0
Related Commands
DescriptionCommand
Displays policy configuration information for all classes configured
for all service policies on the specified interface.
show policy-map interface, on page 125
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
OL-23235-03 131
Quality of Service Commands on the Cisco IOS XR Software
show policy-map targets
To Next Page
Loading...
