show qos ea trace
To display the processing information of the QoS component on the line card, use the show qos ea trace
command in EXEC mode.
show qos ea trace [all] [file name original location node-id] [hexdump] [last entries] [location node-id]
[tailf] [misc] [reverse] [stats] [unique] [verbose] [wrapping] [internal] [external] [errors] [qfifo]
Syntax Description
(Optional) Specifies all trace entries.all
(Optional) Specifies the original location of a file.
file name original location
node-id
(Optional) Displays trace entries in hexidecimal format.hexdump
(Optional) Displays a specified number of the most recent trace entries.
last entries
(Optional) Displays trace entries associated with a designated node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
(Optional) Displays new trace entries as they are added.tailf
(Optional) Displays miscellaneous trace entries.misc
(Optional) Displays the most recent trace entries first.reverse
(Optional) Displays trace entry statistics.stats
(Optional) Displays unique trace entries with counts.unique
(Optional) Displays internal trace entry debugging information.verbose
(Optional) Displays wrapping trace entries.wrapping
(Optional) Displays internal trace entries.internal
(Optional) Displays external events received.external
(Optional) Displays error traces.errors
(Optional) Displays QFIFO component interface events.qfifo
Command Default
No default behavior or values
Command Modes
EXEC
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
132 OL-23235-03
Quality of Service Commands on the Cisco IOS XR Software
show qos ea trace
To Next Page
Loading...
Need help?
General
