Cisco CRS Command Reference Guide

avg_frac = 0
drop threshold = 0
average length = 0
instantaneous length = 0
high watermark = 0
The following table describes the significant fields shown in the display.
Table 10: show qos redq Field Descriptions
DescriptionField
Weight assigned to the specified class.
If no weight has been assigned, the show policy-map
interface command output shows “No explicit weight
assigned for this class.”
weight
Remainder accrued in the calculation of the average
queue length.
avg_frac
Drop threshold of the queue.drop threshold
Average length of the queue.average length
Instantaneous length of the queue.instantaneous length
Maximum length of the queue.high watermark
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
OL-23235-03 141
Quality of Service Commands on the Cisco IOS XR Software
show qos redq

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs