Cisco Firepower 2100 Series Hardware Installation Guide

—Two power supply module tie wraps and clamps
(part number 52-100162-01)
11
QR Code Sticker
The QR code sticker on the front panel of the chassis points to the Firepower Easy Deployment Guide for
Cisco Firepower 1000 or 2100 Firewalls that explains low touch provisioning (LTP). LTP allows anyone to
connect a new Firepower 2100 to a network so that the IT department can onboard the device to CDO and
configure it remotely. CDO supports Firepower Threat Defense (FTD) version 6.7 and later.
The following figure shows the QR code sticker.
Figure 5: QR Code Sticker
The following figure shows the placement of the QR code sticker on the front panel of the 2100 chassis.
Figure 6: QR Code Sticker on the Firepower 2100 Front Panel
—QR code sticker1
Serial Number Location
The serial number for the Firepower 2100 series chassis is located on the pullout asset card on the front panel.
Cisco Firepower 2100 Series Hardware Installation Guide
8
Overview
QR Code Sticker

Cisco Firepower 2100 Series Specifications

General

Brand	Cisco
Model	Firepower 2100 Series
Category	Firewall
Language	English