Cisco Firepower 2140 Hardware Installation Guide

Figure 3: Firepower 2130 and 2140 Package Contents
Blue console cable PC terminal adapter2Firepower 2130 or 2140 chassis1
SFP transceiver
(Optional; in package if ordered)
41 or 2 power cords (country-specific)3
Six 8-32 x .25-in. slide rail locking bracket
screws
6Slide rail kit
Left and right slide rails and two M3x6
mm wafer head screws
5
1 ground lug kit
#6 AWG lug, two 10-32 x .38-in. screws
82 slide rail locking brackets7
2 user documents:
• Useful Links Cisco Firepower 2100
Series document
• Start Here document
10Cable management bracket kit
2 cable management brackets and four 8-32
x 0.375-in. screws
(Optional; in package if ordered)
9
2 power supply module tie wraps and
clamps
11
Serial Number Location
The serial number for the Firepower 2100 series chassis is located on the pullout asset card on the front panel.
Cisco Firepower 2100 Series Hardware Installation Guide
6
Overview
Serial Number Location

Cisco Firepower 2140 Specifications

General

Model	Cisco Firepower 2140
Category	Firewall
Firewall Throughput	20 Gbps
Power Supply	Dual, Hot-swappable
Firewall Throughput (Maximum)	20 Gbps
Firewall Throughput (Application Visibility and Control AVC)	10 Gbps
Form Factor	1 RU
Memory	32 GB
Operating System	Cisco Firepower Threat Defense (FTD)
Maximum Concurrent Sessions	4, 000, 000
Network Interfaces	8 x 1G/10G SFP+
Concurrent Sessions	4, 000, 000
Interfaces	8 x 1G/10G SFP+
Throughput	20 Gbps