Cisco Firepower 2140 Hardware Installation Guide

Figure 2: Firepower 2110 and 2120 Package Contents
Blue console cable PC terminal adapter2Firepower 2110 or 2120 chassis1
SFP transceiver
(Optional; in package if ordered)
41 power cord (country-specific)3
1 ground lug kit
#6 AWG lug, two 10-32 x .38-in. screws
62 rack-mount brackets and six 8-32,
0.281-in. screws
5
2 user documents:
• Useful Links Cisco Firepower 2100
Series document
• Start Here document
8Cable management bracket kit
2 cable management brackets and four 8-32
x 0.375-in. screws
(Optional; in package if ordered)
7
Rack-mount screws:
• Four 12-24, 0.75 in.
• Four 10-32, 0.75 in.
• Four M6, 19 mm
9
The following figure shows the package contents for the Firepower 2130 and 2140. The contents are subject
to change and your exact contents will contain additional or fewer items depending on whether you order the
optional parts. See Product ID Numbers, on page 30 for a list of the product IDs (PIDs) associated with the
2130 and 2140 package contents.
Cisco Firepower 2100 Series Hardware Installation Guide
5
Overview
Package Contents

Cisco Firepower 2140 Specifications

General

Model	Cisco Firepower 2140
Category	Firewall
Firewall Throughput	20 Gbps
Power Supply	Dual, Hot-swappable
Firewall Throughput (Maximum)	20 Gbps
Firewall Throughput (Application Visibility and Control AVC)	10 Gbps
Form Factor	1 RU
Memory	32 GB
Operating System	Cisco Firepower Threat Defense (FTD)
Maximum Concurrent Sessions	4, 000, 000
Network Interfaces	8 x 1G/10G SFP+
Concurrent Sessions	4, 000, 000
Interfaces	8 x 1G/10G SFP+
Throughput	20 Gbps