Cisco Firepower 9300 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
4) Configure Local Sources:
a) Click the Local Sources tab.
b) On the Local Sources tab, complete the following fields:
Name
Description
Faults Admin State field
Whether system fault logging is enabled or not. If the
Enable check box is checked, the Firepower chassis logs
all system faults.
Audits Admin State field
Whether audit logging is enabled or not. If the Enable
check box is checked, the Firepower chassis logs all audit
log events.
Events Admin State field
Whether system event logging is enabled or not. If the
Enable check box is checked, the Firepower chassis logs
all system events.
c) Click Save.

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes