Cisco IE-3000-8TC Getting Started Guide

1
Cisco IE 3000 Switch Getting Started Guide
OL-16234-01
Cisco IE 3000 Switch
Getting Started Guide
• About This Guide, page 1
• Taking Out What You Need, page 2
• Connecting Expansion Modules, page 3
• Running Express Setup, page 5
• Managing the Switch, page 9
• Installing the Switch, page 11
• Connecting to the Switch Ports, page 21
• In Case of Difficulty, page 25
• Obtaining Documentation and Submitting a Service Request, page 28
• Cisco One-Year Limited Hardware Warranty Terms, page 28
About This Guide
This guide provides instructions on how to use Express Setup to initially
configure your Cisco IE 3000 switch. Also covered are switch management
options, module connection procedures, basic mounting procedures, and
troubleshooting help.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes