Cisco IE-3000-8TC - Optional Procedures; Default Chapter; Connecting to the Switch Ports

To Next Page

To Previous Page

Cisco IE 3000 Switch Getting Started Guide

OL-16234-01

Cisco IE 3000 Switch Getting Started Guide

Optional Procedures

For detailed instructions on these procedures, see the Cisco IE 3000 Switch

Hardware Installation Guide on Cisco.com.

• Wiring the external alarm relays

• Connecting the switch to the optional PWR-IE3000-AC power converter

• Mounting the switch on the wall

• Installation in a hazardous environment

Connecting to the Switch Ports

These sections describe how to connect to the switch ports, the SFP module ports,

and the dual-purpose ports. For additional cabling information, see the Cisco IE

3000 Switch Hardware Installation Guide on Cisco.com.

• Connecting to 10/100 and 10/100/1000 Ports, page 22

• Installing SFP Modules and Connecting to Ports, page 23

• Connecting to Dual-Purpose Ports, page 24

• Connecting to 100BASE-FX Ports, page 24

• Verifying Port Connectivity, page 24

Step 3

Optionally, insert a second power and relay

connector into the Pwr B receptacle on the

switch front panel.

Step 4

Use a flathead screwdriver to tighten the captive screws on the sides of the second power and

relay connector.

VRTA A

202333

Other manuals for Cisco IE-3000-8TC