Cisco IE 3000 Getting Started Guide

21
Cisco IE 3000 Switch Getting Started Guide
OL-16234-01
Cisco IE 3000 Switch Getting Started Guide
Optional Procedures
For detailed instructions on these procedures, see the Cisco IE 3000 Switch
Hardware Installation Guide on Cisco.com.
• Wiring the external alarm relays
• Connecting the switch to the optional PWR-IE3000-AC power converter
• Mounting the switch on the wall
• Installation in a hazardous environment
Connecting to the Switch Ports
These sections describe how to connect to the switch ports, the SFP module ports,
and the dual-purpose ports. For additional cabling information, see the Cisco IE
3000 Switch Hardware Installation Guide on Cisco.com.
• Connecting to 10/100 and 10/100/1000 Ports, page 22
• Installing SFP Modules and Connecting to Ports, page 23
• Connecting to Dual-Purpose Ports, page 24
• Connecting to 100BASE-FX Ports, page 24
• Verifying Port Connectivity, page 24
Step 3
Optionally, insert a second power and relay
connector into the Pwr B receptacle on the
switch front panel.
Step 4
Use a flathead screwdriver to tighten the captive screws on the sides of the second power and
relay connector.
VRTA A
VRTA A
VRTA A
202333

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English