Cisco IE 3010 Getting Started Guide

5
Cisco IE 3010 Switch Getting Started Guide
78-19582-02
Cisco IE 3010 Switch Getting Started Guide
Step 4
Approximately 45 seconds after the switch powers on, it begins the power-on self-test
(POST), which can take up to 5 minutes.
s
During POST, the SYSTEM LED blinks green, and the port LEDs turn green.
When POST is complete, the SYSTEM LED remains green, and the other LEDs turn off.
Troubleshooting
If the SYSTEM LED blinks green, does not turn green, or turns amber, contact your Cisco
representative or reseller. The switch failed POST.
Step 5
Press the recessed Express Setup button with
a simple tool, such as a paper clip.
You might need to press the button for
3 seconds.
When you press the Express Setup button, a
switch 10/100 Ethernet port LED blinks
green.
Troubleshooting
If a switch port LED does not blink green,
repeat Steps 1 to 5. You can also use the setup
program described in the switch hardware
guide.
207218

Cisco IE 3010 Specifications

General

Brand	Cisco
Model	IE 3010
Category	Switch
Language	English