Linksys E4200
WPA2/WPA Mixed Mode
NOTE: If you select WPA2/WPA Mixed Mode as
your Security Mode, each device in your wireless
network MUST use WPA2/WPA and the same
passphrase .
Chapter 2: Advanced Configuration
WPA Personal
NOTE: If you select WPA Personal as your
Security Mode, each device in your wireless
network MUST use WPA Personal and the same
passphrase .
Wireless Security > WPA2/WPA Mixed Mode
Wireless Security > WPA Personal
Passphrase Enter a passphrase of 8-63 characters . The
default is password . If you used the setup software
for installation, then the default is changed to a unique
passphrase .
Passphrase Enter a passphrase of 8-63 characters . The
default is password . If you used the setup software
for installation, then the default is changed to a unique
passphrase .
WPA2 Personal
NOTE: If you select WPA2 Personal as your
Security Mode, each device in your wireless
network MUST use WPA2 Personal and the
same passphrase .
WPA2/WPA Enterprise Mixed Mode
This option features WPA2/WPA used in coordination with
a RADIUS server . (This should only be used when a RADIUS
server is connected to the router .)
NOTE: If you select WPA2/WPA Enterprise Mixed
Mode as your Security Mode, each device in
your wireless network MUST use WPA2/WPA
Enterprise and the same shared key .
Wireless Security > WPA2 Personal
Passphrase Enter a passphrase of 8-63 characters . The
default is password . If you used the setup software
for installation, then the default is changed to a unique
passphrase .
Wireless Security > WPA2/WPA Enterprise Mixed Mode
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS
server . The default is 1812 .
Shared Key Enter the key shared between the router and
the server .
Maximum Performance Wireless-N Router
15
To Next Page
Loading...
Need help?
General
