Cisco Linksys E4200 User Manual

Linksys E4200
Create a Group Account
1 . In the Group Management section on the Storage >
Administration screen, click Create New Group .
Administration > Group Management
2 . The Group Account screen appears .
In the Group Name field, enter a name for the group .
Administration > Group Account
3 . In the Description field, enter keywords to describe the
group .
4 . From the Access drop-down menu, select the
appropriate level of access, read-and-write or read-
only .
5 . Click Create to apply your changes, or click Cancel to
clear your changes . Click Close to exit the screen and
return to the Administration screen .
Create a User Account
1 . In the User Management section on the Storage >
Administration screen, click Create New User .
Administration > User Management
Appendix B: How to Connect and Access USB Storage
2 . The User Account screen appears .
In the Name field, enter a name for the user .
Administration > User Account
3 . In the Full Name field, enter the actual name of the
user .
4 . In the Description field, enter keywords to describe the
user .
5 . In the Password and Confirm Password fields, enter the
password that the user will use for login .
6 . From the Group Member drop-down menu, select the
appropriate group .
NOTE: To temporarily disable an account, select
Account Disabled .
7 . Click Create to apply your changes, or click Cancel to
clear your changes . Click Close to exit the screen and
return to the Administration screen .
Maximum Performance Wireless-N Router
60

Cisco Linksys E4200 Specifications

General

Wireless Standard	802.11a/b/g/n
Frequency Bands	2.4 GHz and 5 GHz
USB Ports	1 x USB 2.0
Antenna Type	Internal
Wired Speed	10/100/1000 Mbps
Ethernet Ports	4 x 10/100/1000 Mbps LAN
Security Features	WPA/WPA2
Maximum Data Rate	450 Mbps (5 GHz)
Weight	0.32 kg