Cisco ME 3400E Getting Started Guide

GETTING STARTED GUIDE
Cisco ME 3400E Ethernet Access Switch Getting Started Guide
INCLUDING LICENSE AND WARRANTY
1 About this Guide, page 2
2 Taking Out What You Need, page 2
3 Initial Setup, page 5
4 Managing the Switch through the CLI, page 8
5 Rack-Mounting the Switch, page 9
6 Connecting to the Switch Ports, page 12
7 In Case of Difficulty, page 13
8 Obtaining Documentation and Submitting a Service Request, page 15
9 Cisco 90-Day Limited Hardware Warranty Terms, page 15

Cisco ME 3400E Specifications

General

Category	Switch
Form Factor	Rack-mountable
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400E
Management	Yes
Remote Management Protocol	SNMP, Telnet
Jumbo Frame Support	Yes
Routing Protocol	Static routing
Features	VLAN support, IGMP snooping, Quality of Service (QoS), Port Security
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 30 cm
Operating Temperature	0 to 45°C
Relative Humidity	10 - 95% (non-condensing)
Power over Ethernet	Optional (PoE models available)
Weight	4.8 kg
Storage Temperature	-25 to 70°C