Name: Cisco ME 3400E
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

CHAPTER

2-1

Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide

OL-16447-01

Switch Installation

Read the topics and perform the procedures in this order:

• Warnings, page 2-1

• Installation Guidelines, page 2-4

• Verifying Switch Operation, page 2-5

• Installing the Switch, page 2-5

• Installing and Removing SFP Modules, page 2-19

• Inserting and Removing the SFP Module Patch Cable, page 2-21

• Connecting to the 10/100 and 10/100/1000 Ports, page 2-22

• Connecting to Fiber-Optic SFP Modules, page 2-24

• Connecting to 1000BASE-T SFP Modules, page 2-25

• Connecting to Dual-Purpose Ports, page 2-26

• Where to Go Next, page 2-26

Warnings

These warnings are translated into several languages in the Regulatory Compliance and Safety

Information for the Cisco ME 3400E Ethernet Access Switches document that ships with the switch.

These warning statements apply to all the switches:

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings,

necklaces, and watches). Metal objects will heat up when connected to power and ground and can

cause serious burns or weld the metal object to the terminals.

Statement 43

Warning

Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury

and equipment damage.

Statement 48

Other manuals for Cisco ME 3400E

Questions and Answers:

Need help?

Do you have a question about the Cisco ME 3400E and is the answer not in the manual?

General

Category	Switch
Form Factor	Rack-mountable
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400E
Management	Yes
Remote Management Protocol	SNMP, Telnet
Jumbo Frame Support	Yes
Routing Protocol	Static routing
Features	VLAN support, IGMP snooping, Quality of Service (QoS), Port Security
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 30 cm
Operating Temperature	0 to 45°C
Relative Humidity	10 - 95% (non-condensing)
Power over Ethernet	Optional (PoE models available)
Weight	4.8 kg
Storage Temperature	-25 to 70°C