printers, access points, or Ethernet switches.
A steady green LED indicates bidirectional connectivity,
and flashing green indicates traffic.
PoE+ Port
[Far right Ethernet port] One of the LAN port provides
PoE+ for connectivity to computers, printers, access
points, or Ethernet switches, up to 15W of PoE power.
A steady green LED indicates bidirectional connectivity,
and flashing green indicates traffic.
Power input Designed for use only with the unit’s power supply.
Z3C
Additional functions on the back panel are described below, from left to right.
SIM Card Slot
Active, supported SIM cards can be inserted into this
slot to enable cellular capabilities.
Reset button
Insert a paper clip if a reset is required.
• Press for 1 second to delete a downloaded
configuration and reboot.
• Press and hold for more than 10 seconds to force a
full factory reset.
USB port
USB 3.0 for 3G/4G wireless cards. Traffic status is
indicated by the USB LED.
WAN / Internet port This port provides connectivity to the WAN.
7
To Next Page
Loading...
