Cisco NCS 1001 - Page 34

| +--rw config
| | +--rw target-attenuation? decimal64
| +--ro state
| +--ro target-attenuation? decimal64
| +--ro attenuation? decimal64
| +--ro optical-power
| +--ro instant? decimal64
| +--ro avg? decimal64
| +--ro min? decimal64
| +--ro max? decimal64
+--rw common-in
| +--rw config
| +--ro state
| +--ro optical-power
+--rw common-output
+--rw config
+--ro state
+--ro optical-power
+--ro instant? decimal64
+--ro avg? decimal64
+--ro min? decimal64
+--ro max? decimal64
Inventory Details
The Cisco NCS1001 PSM pluggable module is provided through the following inventory information:
Naming ConventionComponent
0/S-PSM-OMEDFA Module, PSM
Openconfig Channel Monitoring Model
The following is the tree structure of OpenConfig Channel Monitor model:
module: openconfig-channel-monitor
+--rw channel-monitors
+--rw channel-monitor* [name]
+--rw name -> ../config/name
+--rw config
| +--rw name? -> /oc-platform:components/component/name
| +--rw monitor-port? -> /oc-platform:components/component/name
+--ro state
| +--ro name? -> /oc-platform:components/component/name
| +--ro monitor-port? -> /oc-platform:components/component/name
+--rw channels
+--ro channel* [lower-frequency upper-frequency]
+--ro lower-frequency -> ../state/lower-frequency
+--ro upper-frequency -> ../state/upper-frequency
+--ro state
+--ro lower-frequency? oc-opt-types:frequency-type
+--ro upper-frequency? oc-opt-types:frequency-type
+--ro psd? oc-types:ieeefloat32
Inventory Details
Channel monitoring functions are provided through OCM embedded on the EDFA pluggable modules. The
following inventory items provide the names of the channel monitoring:
Naming ConventionComponent
0/S-CHMON-PREEDFA Module, Pre-Amplifier OCM
Data Models Configuration Guide for Cisco NCS 1001
30
Configuring NCS 1001 Using OpenConfig Data Model
Openconfig Channel Monitoring Model