Cisco NCS 4200 Series - Verifying Ethernet Data Plane Loopback

Path 2:
configured as member of a concatenated interface
Path 3:
configured as member of a concatenated interface
Path 4:
configured as member of a concatenated interface
Path 5:
configured as member of a concatenated interface
Path 6:
configured as member of a concatenated interface
Path 7:
configured as member of a concatenated interface
Path 8:
configured as member of a concatenated interface
Path 9:
configured as member of a concatenated interface
Path 10:
configured as member of a concatenated interface
Path 11:
configured as member of a concatenated interface
Path 12:
configured as member of a concatenated interface
Configuring VCoP Smart SFP on T3
Enabling VCoP Smart SFP on T3
enable
configure terminal
platform smart-sfp interface gigabitEthernet 0/0/10 type DS3
end
Configuring CEM Circuits on T3 VCoP Smart SFP
enable
configure terminal
controller t3 0/0/10
cem-group 0 cep
end
Configuring Cablelength on T3 VCoP Smart SFP
enable
configure terminal
controller t3 0/0/10
cablelength long
end
The range of cablelengthNote
•
long - 224-450 ft
•
short - 0-224 ft
13