Cisco NCS 4200 Series - No Ip Address Cem; Configuration Examples for Vcop Smart SFP

0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
0 Severely Errored Line Secs
0 Far-End Errored Secs, 0 Far-End Severely Errored Secs
0 CP-bit Far-end Unavailable Secs
0 Near-end path failures, 0 Far-end path failures
0 Far-end code violations, 0 FERF Defect Secs
0 AIS Defect Secs, 0 LOS Defect Secs
0 Bipolar Violations/Excessive Zero Errors
0 Code Violations Path Errors, 14 B3 Errors
Configuration Examples for VCoP Smart SFP
Example: VCoP Smart SFP Configuration on OC-3
Enabling the VCoP SSFP.
#########################
platform smart-sfp interface GigabitEthernet0/0/8 type OC3
configuring the sonet controller.
=============================
controller SONET 0/0/8
framing sonet
!
sts-1 1
mode unframed
cem-group 20 cep
!
sts-1 2
mode unframed
cem-group 21 cep
!
sts-1 3
mode unframed
cem-group 22 cep
!
configuring the cem interface
##########################
interface CEM0/0/8
no ip address
cem 20
xconnect 2.2.2.2 3000 encapsulation mpls
!
cem 21
xconnect 2.2.2.2 3001 encapsulation mpls
!
cem 22
xconnect 2.2.2.2 3002 encapsulation mpls
!
Example: VCoP Smart SFP Configuration on OC-12
Enabling the VCoP SSFP.
#########################
platform smart-sfp interface GigabitEthernet0/0/8 type OC12
configuring the sonet controller.
=============================
controller SONET 0/0/8
framing sonet
!
sts-1 1
mode unframed
cem-group 20 cep
!
sts-1 2
mode unframed
24