EasyManuals Logo
Home>Cisco>Network Router>Network Device Cisco 2800

Cisco Network Device Cisco 2800 User Manual

Cisco Network Device Cisco 2800
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
2
Troubleshooting Cisco 2800 Series Routers
OL-5789-01
Solving Problems
Solving Problems
The key to solving problems is to isolate the problem to a specific subsystem by comparing what the
router is doing to what it should be doing.
The LEDs on the front and rear panel of the router enable you to determine router performance and
operation. LEDs are described in the following sections:
Reading System LEDs, page 4
Reading Port and Module LEDs, page 6
When solving problems, consider the following router subsystems:
Power and cooling systems—External power source, power cable, router power supply and circuit
breaker, and router blower and fan. Also consider inadequate ventilation or air circulation.
Modules—LEDs on the modules help identify a failure.
Cables—External cables that connect the router to the network.
Troubleshooting the Power and Cooling Systems
Both the system LED and the fans can help you troubleshoot a power problem. Check the following
items to help isolate the problem:
Normal Indications
With the power switch on, the normal indications are:
SYS PWR LED on green and continuous
Fans operating
AUX/PWR LED on green and continuous, if the IP phone power module or Cisco Redundant Power
Supply (RPS) is installed
Fault Indications
Check the following symptoms to locate or eliminate faults in the power and cooling systems:
With the power switch on, is the SYS PWR LED on?
If the LED is green and continuous, the router is receiving power and is functional.
If the LED is amber, the router is receiving power but is not functional.
If the LED is off, check the power source and power cable.
With the power switch on and the SYS PWR LED on and green, do the fans operate?
If no, check the fans.
If yes, the power system is functioning.
With the power switch on and the PWR SYS LED off, do the fans operate?
If yes, the router is receiving power. The fans are connected directly to the DC outputs of the
power supply.
If no, check the power source and power cable.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Network Device Cisco 2800 and is the answer not in the manual?

Cisco Network Device Cisco 2800 Specifications

General IconGeneral
BrandCisco
ModelNetwork Device Cisco 2800
CategoryNetwork Router
LanguageEnglish

Related product manuals