1-3
Cisco Nexus 2000 Series Hardware Installation Guide
OL-19013-05
Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
Cisco Nexus 2248TP-E
Figure 1-2 Rear View of the Cisco Nexus 2248TP-E Chassis
Ports
The Cisco Nexus 2248TP-E FEX supports a total of 48 100/1000BASE-T ports and four 10-Gigabit
Ethernet uplinks (SFP+). It provides two types of ports: host-facing downlink ports and network-facing
uplink ports. Uplink ports are colored with yellow for connectivity to the upstream parent Cisco Nexus
5000 Series switch.
Power Supplies
The Cisco Nexus 2248TP-E FEX chassis has two bays for front-end AC or DC power supplies. This
chassis is fully functional with one power supply, but you can install a second power supply for power
redundancy. The power supply is hot swappable during operations.
Table 1-1 lists the power supplies that you can order with the Cisco Nexus 2248TP-E FEX.
1 Power supply 3 Power supply (blank shown)
2 Fan tray 4 Status (top) and ID (bottom) LEDs
1 Status (top) and ID (bottom) LEDs 3 100/1000 downlink ports (48)
2 HDMI port 4 SFP+ uplink ports (four)
Table 1-1 Power Supplies for the Cisco Nexus 2200 Platform Chassis
Power Supply Part Number
AC power supply with front-to-back airflow N2200-PAC-400W
AC power supply with back-to-front airflow N2200-PAC-400W-B
To Next Page
Loading...
