Send documentation comments to n5kdocfeedback@cisco.com
1-7
Cisco Nexus 5000 Series NX-OS Interfaces Operations Guide, Release 5.0(3)N2(1)
Chapter 1 Virtual Port Channel Operations
vPC Consistency Checks
You can use the show vpc command also shows the vPC consistency check result for each vPC and the
reason for the consistency check failure.
This example shows how to display the vPC consistency check status:
If the consistency check fails, the consistency check is not performed on vPC member ports that are
down.
If the consistency check has succeeded and the port is brought down, the consistency check shows that
it was successful.
You can use the show vpc consistency-parameters interface ethernet slot/port command to identify
the configuration difference that leads to a consistency check failure for a specified interface or port
channel.
This example shows how to display configuration differences that lead to consistency check failures.
To Next Page
Loading...
