Send documentation comments to n5kdocfeedback@cisco.com
1-6
Cisco Nexus 5000 Series NX-OS Interfaces Operations Guide, Release 5.0(3)N2(1)
Chapter 1 Virtual Port Channel Operations
vPC Consistency Checks
This example shows that VLAN 5 is suspended but the remaining VLANs are up:
Identifying Inconsistent vPC Configurations
The show vpc command displays the vPC status and the vPC consistency check result for the global
consistency check and the interface-specific consistency check.
This example shows the global vPC consistency check failed because of the mismatched Network QoS
configuration:
You can use the show vpc consistency-parameters global command to identify the configuration
difference between two vPC peer switches.
This example shows the global consistency check failed because the STP mode was configured
differently on the two vPC switches:
To Next Page
Loading...
