Cisco Nexus 5596UP - Transceivers

1-50
Cisco Nexus 5000 Series Hardware Installation Guide
Chapter 1 Overview
Cisco Nexus 5000 Platform Switches
Figure 1-57 Cisco Nexus 5010 Fan Module
The bicolor fan module LED indicates the fan tray health. Green indicates normal operation, while
amber indicates a fan failure.
Transceivers
The Cisco Nexus 5010 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel
transceivers.
This section includes the following topics:
• SFP+ Transceivers, page 1-50
• SFP+ Copper Cables, page 1-51
• SFP Fibre Channel Transceivers, page 1-51
SFP+ Transceivers
The enhanced SFP+ 10-Gigabit Ethernet transceiver module is a bidirectional device with a transmitter
and receiver in the same physical package. It has a 20-pin connector on the electrical interface and
duplex LC connector on the optical interface. The Cisco Nexus 5010 switch supports the following SFP+
optical transceivers:
• SR
• LR (for uplink only)
239201
2
3
1
1 Handle 3 Captive screw
2 Fan module LED
Table 1-11 SFP+ Transceivers
Model Description
SFP-10G-SR 10-Gigabit Ethernet—Short range SFP+ module
SFP-10G-LR 10-Gigabit Ethernet—Long range SFP+ module