Cisco Nexus 93180YC-FX - Power Specifications

Power Specifications
Power specifications include the specifications for each type of power supply module.
500-W AC Power Supply Specifications
These specifications apply to the following power supplies:
• NXA-PAC-500W-PE
• NXA-PAC-500W-PI
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132
VAC, 180-264 VAC)
AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
7.6 A at 100 VAC
3.65 A at 208 VAC
Maximum AC input current
760 A at 100 VACMaximum input volt-amperes
500 WMaximum output power per power supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 500 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
RSP1Form factor
1200-W HVAC/HVDC Power Supply Specifications
These specifications apply to the 1200-W HVAC/HVDC (N9K-PUV-1200W) power supplies.
SpecificationCharacteristic
Nominal (Range)
• 200 to 277 VAC
• –240 to –380 VDC
Input voltage
• AC (for 1230 W output)
• DC (for 1230 W output)
Nominal: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
Cisco Nexus 93180YC-FX ACI-Mode Switch Hardware Installation Guide
49
System Specifications
Power Specifications