Cisco Nexus 9348GC-FX3 - Switch Power Input Requirements; Power Specifications

Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Note
Heat Dissipation
Requirement
Maximum Power
Consumption (AC or
DC)
Typical Power
Consumption (AC or DC)
Switch
825.738 BTUs
per hour
242 W226 WCisco Nexus 9348GC-FX3
Power Specifications
Power specifications include the specifications for each type of power supply module.
350-W AC Power Supply Specifications
These specifications apply to the following power supplies:
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132 VAC, 180-264 VAC)AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
7.6 A at 100 VAC
3.65 A at 208 VAC
Maximum AC input current
760 A at 100 VACMaximum input volt-amperes
350 WMaximum output power per power
supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 350 WMaximum hold-up time
-54 VDCPower supply output voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP1Form factor
Cisco Nexus 9348GC-FX3 NX-OS Mode Switch Hardware Installation Guide
39
System Specifications
Switch Power Input Requirements