Cisco Nexus 9516 - Page 4

Inspecting the New Switch 18
Installing the Bottom-Support Rails 19
Installing a Chassis in a Rack or Cabinet 22
Grounding the Chassis 27
Starting Up the Switch 28
Connecting a 3-kW AC Power Supply to an AC Power Source 29
Connecting a 3-kW Universal AC/DC Power Supply to an AC Power Source 29
Connecting a 3-kW Universal AC/DC Power Supply to a DC Power Source 30
Connecting a 3-kW DC Power Supply to a DC Power Source 30
Connecting the Switch to the Network 35
CHAPTER 4
Guidelines for Connecting Ports 35
Connecting a Console to the Switch 36
Connecting the Management Interface 37
Creating the Initial Switch Configuration 38
Connecting Interface Ports 40
Connecting a BASE-T Port to the Network 40
Disconnecting a BASE-T Port from the Network 40
Connecting an Optical Port to the Network 41
Disconnecting Optical Ports from the Network 41
Maintaining Transceivers and Optical Cables 42
Managing the Switch 43
CHAPTER 5
Displaying Information About the Installed Hardware Modules 43
Displaying the Hardware Inventory for a Switch 43
Displaying the Backplane and Serial Number Information 44
Displaying Environmental Information for the Switch 44
Displaying the Current State of a Module 44
Displaying Temperatures for a Module 45
Connecting to a Module 47
Saving the Module Configuration 48
Shutting Down or Starting Up a Module 48
Purging a Nonfunctioning Module from the Running Configuration 49
Displaying Power Usage Information 49
Cisco Nexus 9516 NX-OS Mode Switch Hardware Installation Guide
iv
Contents