Cisco Nexus 9516 - Page 5

Reload a Module 50
Rebooting a Switch 50
Overview of Supervisor Modules 51
Overview of Power Modes 53
Power Mode Configuration Guidelines 54
Setting the Power Mode 57
Overview of Fan Trays 58
Displaying the Status for the Fan Trays 59
Replacing or Installing Modules, Fan Trays, and Power Supplies 61
CHAPTER 6
Preventing Electrostatic Damage 61
Installing or Replacing a Supervisor Module 61
Upgrading a Supervisor Module 64
Installing or Replacing a System Controller Module 65
Installing or Replacing a Line Card 67
Replacing a Fan Tray 70
Removing a Fan Tray 70
Installing a Fan Tray 72
Replacing a Fabric Module 73
Removing a Fabric Module 74
Installing a Fabric Module 78
Installing or Replacing Power Supplies 82
Installing or Replacing a 3-kW AC Power Supply 82
Installing or Replacing a 3-kW Universal AC/DC Power Supply 85
Installing or Replacing a 3.15-kW Dual Input Universal AC/DC Power Supply 88
Installing or Replacing a 3-kW DC Power Supply 89
Migrating the Switch from Using 40-Gigabit Line Cards to Using 100-Gigabit -EX/-FX Line Cards 93
System Specifications 95
APPENDIX A
Environmental Specifications 95
Switch Dimensions 95
Weights for the Chassis, Modules, Fan Trays, and Power Supplies 96
Power Specifications 98
Power Requirements for Switch Modules 98
Cisco Nexus 9516 NX-OS Mode Switch Hardware Installation Guide
v
Contents